UTS1004 Injectester UIP
All Makes Unit Injector Test Bench
Adapter selection for Caterpillar, Detroit Diesel, Cummins, Bosch and Delphi Unit Injectors.
Adjustable Cam Stroke without touching the Cam!
Patented design for setting cam stroke by just releasing some screws and turning a knob in about 15 seconds. UTS1004 can set its cam stroke between 10 and 18 mm.
2 Solenoid EUI Testing with 2 Solenoid Drive...
UTS1004 drives 2 solenoid unit injectors (Delphi E3; Smart Injector/Pump; F2 & Caterpillar C15-C18) with the necessary drive signals making sure to apply the identical phase differences to create similar load on the plunger and to create the similar inner pressure in the injector. The flow measured in UTS1004 therefore is identical to original engine performance.
BIP & NRT Measurement together
NRT i.e Nozzle Response Time is measured with the sensor on the adapter. BIP on the other hand is measured by injector drive and used for applying the correct signal to the injector. Both values are important for determining the performance of the injector.